About Us

Products

News

Site Map

Home


	Plastic Bag Making Machine

	Folder Making Machine

	Stationery Making Machine

	Sealing Cutting Machine

	Other Machine

Photo Album & Name Card Pocket Making Machine (YS-06 Series)

Home > Products > Stationery Making Machine > Photo Album & Name Card Pocket Making Machine (YS-06 Series)

PRODUCT SPEC

Model

Max-Cutting Size (WXL)

Film Thickness (MM)

Production Per Min. (PC)

Motor(HP)

Ultrasonic (Piece)

Heater(KW)

Power Required(KW)

Machine Size

Measurement Size

N.W.(KG)

G.W.(KG)

1200W

2600W

YS-06H-700-5UP

350~400

0.2~0.24

80-160

0.5

350"

64"

80"

192"

72"

60"

4252

4720

128"

72"

60"

YS-06H-700-5UP

350~400

0.2~0.24

80-160

0.5

6.5

365"

64"

80"

204"

72"

60"

4400

4870

128"

72"

60"

Spare Parts

1. Tool Box
2. Cutting Knife

Optional Equipment

1. Hot Stamping Device
2. Corner Rounding Punching Device
3. 6mm Or 8mm Hole Punching Device

Remark: owing to occasional improvement, above specification may therefore be modified without prior notice.

PRODUCT DESCRIPTION

Photo album & name card pocket making machine produces finished products as below:

PRODUCT CHARACTER

This machine is designed especially for all of kinds of 3-layer or 2-layer photo pocket andname card pocket. It could be fully automatically achieved from materials in feeding to finished products.
This machine applies 1200w and 2600w ultrasonic to firmly seal in order to operate with sealed mould in coordination. It was pleasing linear vertically and horizontally, it requiresonly changing mould for special standard samples.
This machine applies automatically servo-control system computer, it is easy to operate and is convenient to run with rubber-roller unit, operation process is under high and stable speed. Accomplished with high efficient spared parts to match all kinds of control and monitor systems. This will enable the machine to automatically stop if there are any problems during the process of operation. The alarm is also active to avoid wasting raw material and protect the machine itself.
All the material unwinds equip with pneumatic edge position controller (E.P.C.) to enable edge of product to be trimmed.